Installing The Scan2Pc Manager; Using The Scan2Pc Manager; Uninstalling The Scan2Pc Manager - Pandigital PANSCN05 Bedienungsanleitung

Installing the Scan2PC Manager

1. Connect the Photo Converter to your PC (see instructions beginning
on page 11), using the
Converter).
2. When the Windows Explorer window opens, click the '+' next to the
Pandigital folder (listed under the
Utility
folder.
3. In the right window pane, double-click the
"Scan2PC_Setup_Vxxxx.exe" file to begin the Scan2PC installation
(see example above).
4. Follow the on-screen instructions to complete the installation.
 Once installed, the
Scan2PC Manager
startup, and the
 If you want to close the
the icon and select Exit.

Using the Scan2PC Manager

CAUTION: To maximize memory usage, close all other applications programs before scanning multi-image filmstrips.
1. When the Photo Converter is connected via USB cable to the PC, the
Status/Card light will be blinking. The following
will appear.
2. You can specify the location where you want the scanned images to be
saved, either on the memory card or in a specific folder on the PC.
After your first scan, a folder titled Photo1 is added to the memory card
file structure. Therefore, if Scan2PC is selected, the scanned images will
be saved to the following location by default:
Windows 2000 and XP: C:\Documents and Settings\(your username)\My
Documents\My Pictures\Photo1\
Windows Vista or Windows 7: C:\Users\(your username)
\Pictures\Photo1\
You can also click the
Apply
3. Click ; the window will close.
4. Scan your original as instructed beginning on page 8.
5. The scanned image will be saved to the location you selected in step 2 above.
Each scanned image is given a file name with the prefix
images are stored. For example,
If the file name reaches
subsequent new files, and so on.
There can be up to 9 folders (
light blinks.
 If you want to start the
Desktop, or right-click the
 If you want to temporarily close the

Uninstalling the Scan2PC Manager

1. From the PC Start menu, select All Programs > Scan2PC > Uninstall.
2. Follow the uninstall wizard to uninstall the software.
3. Restart your PC when prompted to do so.
 If you choose to restart later, be aware that the
Pandigital SD card
(included with Photo
PDSCAN
drive), and then select the
runs automatically upon PC
icon stays on the system tray.
Scan2PC Manager
temporarily, right-click on
Scan2PC Manager
button to select a different location if you prefer.
PD_0001.jpg PD_0002.jpg
,
PD_9999.jpg Photo1
in the
Photo1..9 PD_0001... PD_9999
,
Scan2PC Manager
manually, double-click the
icon in the system tray and select
Scan2PC Manager
Scan2PC
window
PD_
followed by a 4- digit sequential number in the order the
.
Photo2
folder, a new folder titled
) on a memory card. If exceeded, the Status/Card indicator
icon on the
Setting
.
, right-click on the icon and select
uninstall will not be completed until you restart the PC.
will automatically be created to store
Exit
.
13