Herunterladen Diese Seite drucken

Bosch ISP-EMIL-120 Installationsanleitung Seite 23

Vorschau ausblenden Andere Handbücher für ISP-EMIL-120:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
ISP-EMIL -120 LSN Expansion Module
Technical Specifications
Operating voltage/current consumption
– Operating voltage
– Current consumption LSN part
Primary lines PL 1 - PL 6
– Connection options
– Terminal resistance
– Interruption voltage
– Line resistance
– Alarm criteria
– Response time
Control outputs S1 - S3
– Principle
– Max. voltage
– Over threshold voltage
– Over threshold current
Control output S4
– Principle
– Over threshold voltage
– Over threshold current
Power supply +12 V for external users
– Output voltage
– Output current
When connecting an arming device (e.g. NBS 10/coded arming device)
– PL 1, 2, 5, 6 and S 1 - S 4
– Primary line PL 3
– Primary line PL 4
– Terminal resistors for primary line PL 3 block-type lock R
– Terminal resistors for primary line PL 3 or PL 4 coded
arming device
Environmental conditions/housing
– Permissible operating temperature
– Permissible storage temperature
– Permissible relative humidity
– Protection category
– Environmental class
– EMC interference immunity
– EMC emitted interference
– Housing material and color
– Weight
– Dimensions (H x W x D)
Bosch Sicherheitssysteme GmbH
LSN part
Other functions
Other functions
Installation manual
15 to 33 V DC
9.0 to 30 V DC
4.95 mA
- Max. 370 mA at 12 V
- Max. 180 mA at 28 V
6 detector zones can be programmed as holdup,
intrusion, tamper, lock or entrance
R
= 12.1 kilohm
E
Approx. 6 V
Max. 100 Ohm
± 40% of terminal resistance
< 200 ms
Open collector, active 12 V, 0 V switching
Max. 30 V
< 1.4 V
Max. 20 mA
12 V switching
12.5 V ± 5%
Max. 100 mA
+12.5 V DC ± 5%
Max. 100 mA
See above
Block-type lock or coded arming device
Coded arming device
= 12.1 kilohm ±1% (armed)
E
R
= 12.1 kilohm II 3.92 kilohm ±1% (unarmed)
E
R
= 12.1 kilohm ±1% (coded arming device invalid)
E
R
= 12.1 kilohm II 3.92 kilohm ±1% (coded arming
E
device valid)
-0 °C to +55 °C
-25 °C to +75 °C
<93%, non-condensing
IP 30
II (VdS 2110)
EN 60950, EN 50130, VdS 2110
EN 61000-6-3
ABS + PC-FR, signal white (RAL 9003)
Approx. 400 g
200 x 140 x 48 mm
| en
23
F.01U.076.548 | V3 | 2008.10

Werbung

loading