PeakTech P 6040 A Bedienungsanleitung Seite 8

3. Caution
These units have excellent protection function. The adjustable output have current-limit protection. As
there is controlling circuit for regulating transistor's power loss in the circuit, when short-circuit occurs,
the power loss on large power transistors is not very high, it can't cause any damage to the unit. But
there is still power loss when short-circuit, in order to reduce aging and energy consumption, so this
situation should be find as soon as possible and turn off power, then exclude the faults.
When operating is finished, put it in a dry place of good ventilation, and keep it clean. If it is not in use
for a long period, pull off the power supply plug for storage.
For maintenance, input voltage must be cut off.
All rights, also for translation, reprinting and copy of this manual or parts are reserved. Reproductions
of all kinds (photocopy, microfilm or other) only by written permission of the publisher.
This manual is according the latest technical knowing. Technical changings which are in the interest of
progress, reserved.
We herewith confirm that the units are calibrated by the factory according to the specifications as per
the technical specifications.
We recommend to calibrate the unit again, after 1 year. PeakTech
® 6000 - series
®
© PeakTech 11/2009/Sch.
Bedienungsanleitung / Operation manual
Stabilisierte Labornetzgeräte /
Regulated Laboratory Power Supplies
Heinz-Günter Lau GmbH - Kornkamp 32 - DE-22926 Ahrensburg / Germany
+49-(0) 4102-42343/44 +49-(0) 4102-434 16
info@peaktech.de www.peaktech.de