Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
An innovative patented [EP 1869973] hose connection block prevents water leak-
age when the block is disconnected from the filter.
Tested to TÜV/GS
Complete and ready to plug in
The filter is fully ready to plug in and equipped with filter media. The filter media
have been selected to ensure efficient manual and biological water purification
that leaves your aquarium water clear and healthy.
A wide range of accessories guarantee easy connection to almost any freshwater
or marine aquarium.

Parts and names

1 Hose connection block with water-stop
1 a Middle lever
2 Pump head
3 Pump head seal
4 New distributor plate for incoming water
5 Combi filter basket
6 Filter basket
7 Filter canister 7 a Locking clips
8 Water outlet pipe (to the aquarium) with a threaded hose coupling
9 Angle piece (2 x)
10 Extension piece (2 x)
11 Wide jet pipe
12 Spray bar (2 parts)
13 End cap for spray bar (pre-fitted!)
14 Suction cup (5 x)
15 Short hose clip for suction cup (5 x)
16 Long hose clip for suction cup (5 x)
17 Suction pipe (from the aquarium), telescopic, with a threaded hose coupling
18 Intake strainer
19 Hose ( 12/16 for CP e401, e701 and e901, 16/22 for CP e1501, 19/25 for CP e1901)
F1 Pre-filter media: T-profile foam, 10 ppi*
F2 Biological main filter media: JBL MicroMec high-performance biological filter balls
F3 Biological main filter media: Foam pad 20 ppi
F4 Biological main filter media: Foam pad 20 ppi
F5 Mechanical / biological fine filter media: Foam pad 30 ppi
*ppi: pores per inch; 1 inch = 2.54 cm
2 a left stopcock lever
2 b right stopcock lever
DE
UK
FR
NL
IT
DK
ES
PT
HU
SE
CZ
PL
RU
19

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis