Technical Data; Installation - JBL Greenline CristalProfi 401 Bedienungsanleitung

Technical data

Max. flow rate [l/h]
Aquarium size [l]
L x W x H [mm]*
Filter canister [l]
Filter baskets [l] /
number
Combi filter basket [l]
Filter media [l]
Hose size [mm]
Voltage [V] /
Frequency [Hz]
Power input [W]
W
KWh per year
€ per year**
€ during the guarantee
period**
*including the hose connection block
** at € 0.20 / KWh

Installation

1
Unpacking and preparation
Carefully remove the filter and the separate accessories from the packaging and check that
nothing is missing. In the event that anything is missing or damaged, please contact your
specialist retailer.
Open all 4 locking clips on the filter container and remove the pump head. Serial Numbers
12-27- 0001 and up of the CristalProfi greenline external filter range have a new water distri-
bution plate (4) which seals against the upper combi filter basket with a U-profile. Take out
all the filter baskets one at a time and thoroughly rinse all the filter media under lukewarm
mains water. Place the filter baskets back in the filter canister in the original order.
Before you fit the pump head, biologically activate the filter media with JBL FilterStart
cleansing bacteria (available at your specialist retailer) as follows:
20
CP e401 CP e701
greenline greenline
450 700
40-120 60-200
180 x 210 x 180 x 210 x
284 350
4,6 6,1
1,2 / 1 1,2 / 2
1,1 1,1
2,3 3,5
12/16 12/16
230 / 50
230 / 50
(110 / 60)
4 9 (11)
Energy savings compared to the previous model
4
35
7
28
CP e901 CP e1501
greenline greenline
900 1400
90-300 160-600
180 x 210 x 200 x 235 x
405 460
7,6 12
1,2 / 3 1,9 / 3
1,1 2,3
4,7 8
12/16 16/22
230 / 50 230 / 50
(110 / 60) (110 / 60)
11 (15) 20 (27)
4 15
35 131,4
7 26,28
28 105,12
CP e1901
greenline
1900
200-800
200 x 235 x
564
15
1,9 / 4
2,3
10
19/25
230 / 50
36