lactoferm soyferm Gebrauchsanweisung Seite 20

E
1. Do not use the machine to reheat cold pastes/milk.
2. Do not dip the head unit into water or pour water into the top section.
3. Do not dip the stainless-steel chamber into water or get the underside of the base or the handle
section wet.
4. Be sure the Upper Plug and the Lower Plug are dry before connecting.
5. Unauthorized disassembly of the head will void the warranty.
6. Be careful with the grinding blade components when cleaning.
7. Do not touch the stainless-steel parts before they have cooled completely.
8. The stainless steel chamber can get very hot during operation. Avoid touching the stainless-steel
chamber while machine is in use. (Pay particular attention when children are present).
10. Do not operate with a damaged power cable.
11. Always use a grounded outlet with the power plug.
Making soy milk
Follow these instructions to make fresh soy milk, nut milk, or rice milk.
1. Soak soybeans: Use the measuring cup and take a full cup of dry soybeans (2.5oz – 3.5oz.,
70g – 95g). Rinse soybeans thoroughly and leave to soak.
>> TIP: When soaking the beans, put beans directly into the milk screen and place the screen into
the utility cup. Pour water into the utility cup to soak the beans and let it sit.
2. Add water to stainless steel chamber: Fill the stainless-steel chamber with water so that water
level is between the upper and lower water-level lines. You can control the consistency of the
soybean milk by adding more or less water. The lower level mark will be appropriate for 70g of
soybeans, while the upper level mark will be appropriate for 95g of soybeans. You can add warm
water to shorten the processing time. Do NOT add water over 40ºC.
3. Load soybeans and attach the milk screen to the head unit: Drain the soybeans and load them
into the milk screen. Attach the milk screen to the head unit by moving the blade in a side-to-side
motion to allow the screen to slide properly into place. Lock the milk screen by turning it counter-
clockwise (markings on the milk screen indicate the proper lock and unlock directions).
>> CAUTION: BE SURE THE SCREEN IS PROPERLY LOCKED IN PLACE! If the screen becomes
loose during operation, the spinning blade could damage the screen.
4. Assemble machine and make soybean milk: Connect the head unit to the stainless steel cham-
ber. Make sure the upper plug slides into the upper plug receptacle on top of the handle. Plug the
provided power cord into the power plug receptacle, and connect the other end to a wall socket.
Once plugged in, the soy milk maker will beep and a red light will flash, indicating that the power
is on. Choose the milk setting by pressing the "MILK" button on the head unit, and the red light
will turn solid, indicating that the cycle is starting. The cycle will take approximately 15 minutes.
When finished, the indicator light will blink green, and the machine will beep.
5. Pour milk and enjoy: Unplug the base unit. Lift the head unit from the stainless steel chamber.
When removing the head unit, be careful not to touch the screen. It will be hot. Make sure that
all the milk drains from the screen before moving the head unit away from the stainless steel
chamber. Place the head unit with the screen still attached into the utility cup to cool. Carefully
pour milk from the stainless steel chamber.
>> CAUTION: Soy milk will be hot. Allow milk to cool before serving.
>> TIP: Add your favorite ingredients to flavour your soy milk. Add a pinch of sea salt, or brown
sugar, vanilla - any other flavors you like.
20