i.safe MOBILE INNOVATION 1.0 Schnellstartanleitung Seite 20

Quick Start
2. Too many programs running.
Please reduce the number of running programs.
 The phone is not charging
1. Poor electrical contact.
Please check and replace any dirty or broken plugs.
2. Input voltage is too low.
Please charge for about 1 hour first, remove the plug,
wait a minute and then continue charging. During this
time it is possible that the phone cannot be powered on,
as the voltage is too low.
3. A battery fault has occurred.
Please replace the battery.
 Failures during calls occur
1. SIM Card failures occur.
Please check the contacts of the SIM card or replace the
card.
2. Network error.
Please change to a network provider with a stronger sig-
nal.
 Other people are answering my calls
The smartphone has been set into divert your calls to
another phone number.
Please check and cancel call divert.
 The phone powers off automatically
1. The charge of the battery is too low.
Please recharge the battery.
2. There was an error during operation.
Please restart the phone. If the problem reoccurs, please
contact your vendor or i.safe MOBILE GmbH directly.
20