Troubleshooting - Philips PR3094 Benutzerhandbuch

cleaning
Do not immerse the remote control and the TENS
units in water or rinse them under the tap.
Do not immerse the electrodes in water.
1 Clean the remote control, the charger, the
TENS units and the extension cable (PR3094
only) with a damp cloth and a mild cleaning
agent, e.g. dishwashing liquid.
Note: You can also clean them with 70% isopropyl
alcohol (IPA).
Caution: Do not use any other cleaning agents than
the ones mentioned above, as these cleaning agents
could damage the material, e.g. cause loss of gloss.
2 If the electrodes are dirty, put a drop of water
on your finger and gently rub the dirt off the
surface.
Note: Do not use soap or alcohol to clean the
electrodes.

troubleshooting

This chapter summarises the most common
problems you could encounter with the Wireless
TENS and the Wireless TENS Pro. If you are unable
to solve the problem with the information below,
visit www.philips.com/support for a list of
frequently asked questions or contact the Philips
Consumer Care Centre in your country.
English
37