Mounting Of The Dispenser; Wall Mounting - ophardt RX5 - T Bedienungsanleitung

6. Mounting of the dispenser

6. Mounting the dispenser

6.1 Wall mounting

The dispenser has the option of being free standing or wall mounted.
If free standing please ensure that:
• The surface is level and secure
• It is clear of any passing or moving objects
• If the dispenser is knocked any spillage should not effect near by equipment
1
2
Fix the ingo-man backplate to the wall using the rawl plugs & screws
provided (fig. 1).
Push the wall mount to the wall and slide down over ingo-man
backplate until the spring tongue is engaged (fig. 2).
If the dispenser is to be mounted on a wall please follow the
instructions listed below:
NOTICE
• The dispenser must be mounted to the fixing apertures provided
on a non-sloping wall using at least 3 screws.
• Mount the appliance on the wall using the enclosed fixings or
other suitable fixings.
• Check the suitability of the wall before mounting!
• When choosing where to mount the appliance, please consider
ease of access for filling!
• Do not install the appliance in narrow entrances and passage-
ways!
• Microwaves or fluorescent tubes can cause electromagnetic interfer-
ence. If this is the case, please remove the source of the interference.
This will restore the device to problem-free operation.
Instruction manual
| RX5- T
19 19