Maintenance And Care; Cleaning The Hood; Removing The Panels - AEG DI 8616 Benutzerinformation

Maintenance and Care

• The hood must always be disconnected from the electricity
supply before beginning any maintenance work.

Cleaning the hood

• Clean the outside of the hood using a damp cloth and a solution of
water and mild washing up liquid.
• Never use corrosive, abrasive or flammable cleaning products or
products containing bleach. .
• Never insert pointed objects in the motor's protective grid.
• Only ever clean the switch panel and filter grill using a damp cloth
and mild washing up liquid.
• It is extremely important to clean the unit and change the filters at
the recommended intervals. Failure to do so will cause grease
deposits to build up that could constitute a fire hazard.
• To access the grease filter, first remove the panels which conceal
the grease filter.

Removing the panels

Pull the panels downwards to release them from the support pins (pull
decisively).
The panel/s must always be remounted!
Fig. 3
74
1
2 3
2
1
2
3
1
2
1