AEG DI 8616 Benutzerinformation Seite 87

• Apply the 4 metal bands supplied (19), first the lower 2 (recognisable
because equipped with hooks) and then the upper (to cut to
measure - if necessary widen them slightly to increase the
adherence).
Fig. 10
• Remount the grease filters and the panels.
• Turn the mains power on again at the central electrical panel and
check for correct hood operation.
Note!
Check that the upper halogen lamps are not covered (e.g. by the wall
units).
19
X
19
X
87