Specifications - Sony LG10 Bedienungsanleitung

9. Specifications

Item
No. of axes displayed
Display digits
Resolution
Maximum response speed
Alarm display
Reset
Preset
Machine error compensation
In/mm conversion
Power voltage
Power consumption
Operating environment
Outside dimensions
Mass
Accessories
26
Model
LG10-1
1 axis
Mode display and signed 7-digit display, LED display
(leading–zero suppress, floating minus sign system)
• Magnescale axes : 0.0005 mm, 0.001 mm, 0.005 mm, 0.01 mm and diameter display
• GA axes
• Digiruler axes
• Magnescale axes : 60 m/min. (39"/s)
• GA axes
• Digiruler axes
1. Temporary power failure
2. Scale disconnected or speed faster than the maximum response speed
3. Error in stored data
Resettable at any point on the scale with key switch control.
Preset with key switch control.
When the table moves a certain distance, a unit of compensation value is added or
subtracted for linear compensation. 256 different compensation amounts are available.
Compensation amount : Max. ±600 µm/m (±0.0006 in/in)
The displayed value is converted between inch and millimeter with a switch.
g100 to 230 V ±10% (50/60 Hz)
Max. 35 VA
• Operating guaranteed temperature and humidity range:
• Storage temperature and humidity range:
• Operating guaranteed pressure : 860 to 1060 hPa
• Installation categories
• Pollution degree
235 mm (W) × 80 mm (D) × 130 mm (H) /9.25" × 3.15" × 5.12"
Approx. 1.6 kg/3.5 Lbs
Instruction manual.................................................................................. 1 set
Power cord ............................................................................................. 1 set
Ground wire............................................................................................ 1 pc.
' M4×16 screws ................................................................................... 2 pcs.
Guaranteed operating humidity range
80%
50%
0%
0°C
LG10-2
2 axes
(0.00002", 0.00005", 0.0001", 0.0005" and diameter display)
: 0.005 mm, 0.01 mm and diameter display
(0.0002", 0.0005", 0.001" and diameter display)
: 0.01 mm, 0.02 mm, 0.05 mm, 0.1 mm and diameter display
(0.0005", 0.001", 0.002", 0.005" and diameter display)
: 60 m/min. (39"/s)
: 300 m/min. (196"/s)
0 to 40°C (32 to 104°F) (See the diagram below for the humidity)
–20 to 60°C (–4 to 140°F), 20 to 90%RH (non-condensating)
: II
: 2
31°C 40°C
Temperature
LG10-3
3 axes