Applying Power And Resetting - Sony LG10 Bedienungsanleitung

5-2. Applying Power and Resetting

16
After installation, connections and setting of the resolution have been completed, begin
machining as described in the procedure below.
1
Set the Power Switch to On
Set the POWER switch to ON. "
If " " or "
2
Depress the RESET key.
The first time the key of X-, Y- or Z-axis is pressed after the power is turned on, zero is
RESET
displayed for all axes. The unit is set to measurment mode.
3
Start positioning.
When the machine table is moved, the displacement is displayed. The minus (–) sign appears
depending on the direction of movement of the table.
Example: Displacement of 10 mm in the plus (+) direction on the X-axis
Note
In the example, the resolution is set to 0.0005 mm.
" will be displayed.
" flashes in the display, refer to "7. Alarm Display".
P
Ø
P Ø
P
Ø
P Ø
P Ø
P Ø
and 5 mm in the minus (–) direction on the Y-axis.
RESET
X
RESET
Y
RESET
RESET key
X
RESET
Y
RESET
X
RESET
Y