Special Accessories; Electrical Connection - AEG DD 8696 Benutzerinformation

Special accessories

Charcoal Filter Type 31
Remote control RM 6940
Inox Telescopic chimney K 8004 M (for extraction mode only)
Aluminium Telescopic chimney K 8004 A
(for extraction mode only)
Electrical connection (not for UK)
Safety warnings for the electrician
The mains power supply must correspond to the rating indicated on the
plate situated inside the hood. If provided with a plug connect the hood
to a socket in compliance with current regulations and positioned in an
accessible area. If it not fitted with a plug (direct mains connection) or if
the plug is not located in an accessible area apply a bi-polar switch in
accordance with standards which assures the complete disconnection
of the mains under conditions relating to over-current category III, in
accordance with installation instructions.
IMPORTANT! Before re-connecting the hood circuit to the mains
supply and checking the efficient function, always check that the mains
cable is correctly assembled.
IMPORTANT! Power cable replacement must be undertaken by the
authorized service assistance centre or similar qualified person.
65