Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
°dH
29 - 36
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
< 4
1) No use of salt required.
You must set the water softener manually and electronically.
Manual adjustment
The appliance is set at the factory at position 2.
1. Open the door.
2. Remove the lower basket.
3. Turn the water hardness dial to position 1
or 2 (refer to the chart).
4. Install the lower basket.
5. Close the door.
Electronic adjustment
The water softener is set at the factory at level 5.
1. Press and hold the start/cancel button. Turn the programme knob clockwise until the
programme marker agrees with the first washing programme on the control panel.
2. Release the start/cancel button when the on/off indicator light and the start/cancel
indicator light start to flash.
– At the same time, the end-of-programme indicator light flashes to show the level
of the water softener.
Example:
5 flashes, pause, 5 flashes, pause, etc. = level 5
3. Press the start/cancel button one time to increase the water softener level by one step.
The end-of-programme indicator light shows the new level.
4. Turn the programme knob to the off position to save the operation.
Water hardness
°TH
mmol/l
51 - 64
5,1 - 6,4
40 - 50
4,0 - 5,0
33 - 39
3,3 - 3,9
26 - 32
2,6 - 3,2
19 - 25
1,9 - 2,5
7 - 18
0,7 - 1,8
< 7
< 0,7
Setting the water softener
Water hardness setting
Clarke
manually
36 - 45
2
28 - 35
2
23 - 27
2
18 - 22
1
13 - 17
1
5 - 12
1
< 5
1)
1
7
electronically
7
6
5
4
3
2
1)
1
Werbung
Kapitel
Inhaltsverzeichnis
