English - Kenwood HB150 series Bedlenungsanleitung

safety
Take special care when preparing
food for babies, the elderly and
infirm. Always ensure that the hand
blender foot is thoroughly sterilised.
Use a sterilising solution in
accordance with the sterilising
solution manufacturers instructions.
Never touch the blades while the
machine's plugged in.
Keep fingers, hair, clothing and
utensils away from moving parts.
Unplug from the power supply when
not in use.
Never blend hot oil or fat.
Don't let children or infirm people
use the hand blender without
supervision.
Never use a damaged hand blender.
Get it checked or repaired: see
'service'.
Never put the hand blender in water
or let the cord or plug get wet - you
could get an electric shock.
Never let the cord touch hot
surfaces or hang down where a child
could grab it.
Never use an unauthorised
attachment.
Young children should be supervised
to ensure that they do not play with
this appliance.
Only use your hand blender for its
intended domestic use.
With heavy mixtures, don't use your
hand blender for longer than 50
seconds in any four minute period -
it'll overheat.
before plugging in
Make sure your electricity supply is
the same as the one shown on the
hand blender.
Your hand blender complies with
European Economic Community
Directive 89/336/EEC.
before using for the first time
1 Remove all packaging and throw
away the blade covers.

English

Please unfold the front page illustrations
2 Wash the blender foot and
beaker : see 'cleaning'.
key
blender foot
blender body
on/off button
cord clip
beaker
hanging hook
wall mount
to use the hand blender
You can blend baby food, soups,
sauces, milk shakes and
mayonnaise.
for beaker blending
Don't fill the beaker above 500ml
(17fl oz).
for saucepan blending
Take the pan off the heat and let it
cool slightly. Otherwise your hand
blender could overheat.
1 Plug in. To avoid splashing, place the
blade in the food before switching
on.
2 Hold the beaker steady. Then press
the on/off button.
Move the blade through the food
and use a stabbing action.
If your blender gets blocked, unplug
before clearing.
3 After use, unplug.
storage
1 Wrap the cord around the hand
blender, then clip the end into the
cord clip .
2 Either:
Clip the hanging hook over a kitchen
rack, then attach the hand blender
.
Or secure the hanging hook to the
wall. Remove the wall mount from
the hanging hook and fix to the wall
making sure that the rib is
uppermost. Before drilling check for
2