First Use - Küppersbusch IKE3270-2-2T Benutzerinformation

24
3. The Intensive Cooling indicator goes
off.
Important! The function switches off by
selecting a different fridge set temperature.
Holiday function
This function allows you to keep the refrig-
erator closed and empty during a long holi-
day period without the formation of bad
odours.
Important! The fridge compartment must
be empty with holiday function on.
To switch on the function:
1. Press the Functions button until the
corresponding icon appears.
The Holiday indicator flashes.
The fridge temperature indicator shows
the set temperature.
2. Press the OK button to confirm.
The Holiday indicator is shown.
To switch off the function:
1. Press the Functions button until the
Holiday indicator flashes.
2. Press the OK button to confirm.
3. The Holiday indicator goes off.
Important! The function switches off by
selecting a different fridge set temperature.
Fast Freeze function
To switch on the function:
1. Press the Functions button until the
corresponding icon appears.
The Fast Freeze indicator flashes.
2. Press the OK button to confirm.
The Fast Freeze indicator is shown.
This function stops automatically after 52
hours.

FIRST USE

Cleaning the interior
Before using the appliance for the first time,
wash the interior and all internal accesso-
ries with lukewarm water and some neutral
soap so as to remove the typical smell of a
brand-new product, then dry thoroughly.
To switch off the function before its auto-
matic end:
1. Press the Functions button until the
Fast Freeze indicator flashes.
2. Press the OK button to confirm.
3. The Fast Freeze indicator goes off.
Important! The function switches off by
selecting a different freezer set temperature.
High temperature alarm
An increase in the temperature in the freez-
er compartment (for example due to an ear-
lier power failure) is indicated by:
• flashing the alarm and freezer tempera-
ture indicators
• sounding of buzzer.
To reset the alarm:
1. Press any button.
2. The buzzer switches off.
3. The freezer temperature indicator
shows the highest temperature
reached for a few seconds. Then
shows again the set temperature.
4. The alarm indicator continue to flash
until the normal conditions are restored.
When the alarm has returned the alarm indi-
cator goes off.
Door open alarm
An acoustic alarm will sound if the door is
left open for a few minutes. The door open
alarm conditions are indicated by:
• flashing Alarm indicator
• acoustic buzzer
When normal conditions are restored (door
closed), the alarm will stop.
During the alarm, the buzzer can be switch-
ed off by pressing any button.
Important! Do not use detergents or abra-
sive powders, as these will damage the fin-
ish.