Küppersbusch IKE3270-2-2T Benutzerinformation Seite 23

Switching on
To switch on the appliance do these steps:
1. Connect the mains plug to the power
socket.
2. Press the ON/OFF button if the display
is off.
3. The alarm buzzer may sound after a
few seconds.
To reset the alarm refer to "Door open
alarm".
If "DEMO" appears on the Display, the
appliance is in demonstration mode: re-
fer to "Troubleshooting" paragraph.
4. The temperature indicators show the
set default temperature.
To select a different set temperature refer to
"Temperature regulation".
Switching off
To switch off the appliance do these steps:
1. Press the ON/OFF button for 5 sec-
onds.
2. The display switches off.
3. To disconnect the appliance from the
power disconnect the mains plug from
the power socket.
Switching off the fridge
To switch off the fridge:
1. Press the Functions button until the
corresponding icon appears.
The fridge Off indicator and the fridge
compartment indicator flash.
The fridge temperature indicator shows
dashes.
2. Press the OK button to confirm.
3. The fridge Off indicator is shown.
Switching on the fridge
To switch on the fridge:
1. Press the fridge temperature regulator.
Or:
1. Press the Functions button until the
corresponding icon appears.
The Fridge Off indicator flashes.
2. Press the OK button to confirm.
3. The fridge Off indicator goes off.
To select a different set temperature refer to
"Temperature regulation".
Temperature regulation
The set temperature of the fridge and of the
freezer may be adjusted by pressing the
temperature buttons
Set default temperature:
• + 5°C for the fridge
• -18°C for the freezer
The temperature indicators show the set
temperature.
The set temperature will be reached within
24 hours.
Important! After a power failure the set
temperature remains stored.
Child Lock function
To lock the buttons from unintentional oper-
ation select the Child Lock function.
To switch on the function:
1. Press the Functions button until the
corresponding icon appears.
2. The Child Lock indicator flashes.
3. Press the OK button to confirm.
The Child Lock indicator is shown.
To switch off the function:
1. Press the Functions button until the
Child Lock indicator flashes.
2. Press the OK button to confirm.
3. The Child Lock indicator goes off.
Intensive Cooling function
If you need to insert a large amount of
warm food, for example after doing the gro-
cery shopping, we suggest activating the
Intensive Cooling function to chill the prod-
ucts more rapidly and to avoid warming the
other food which is already in the refrigera-
tor.
To switch on the function:
1. Press the Functions button until the
corresponding icon appears.
The Intensive Cooling indicator flashes.
2. Press the OK button to confirm.
The Intensive Cooling indicator is
shown.
The Intensive Cooling function shuts off au-
tomatically after approximately 6 hours.
To switch off the function before its auto-
matic end:
1. Press the Functions button until the In-
tensive Cooling indicator flashes.
2. Press the OK button to confirm.
23