Inhaltsverzeichnis
Werbung
Faults
Fault rectification by the user
Fault
Appliance does not heat up
but the water flows.
b t th
t
fl
Water runs out of the rear of
the appliance.
Fault rectification by an expert
Fault
Appliance does not heat up
but the water flows.
b t th
t
fl
The appliance does not
heat up although the water
flows and mains power is
flows and mains power is
available.
16
Cause
Insufficient water flow
→ see "hot water power".
→ Shower head is dirty or
furred.
→ No power.
Safety valve has been
triggered
→ Shower hose kinked.
→ Shower head furred up.
Cause
Insufficient water flow rate
→ Filter in the cold water
supply is clogged.
Temperature cut out has been
triggered.
→ Overheating, possibly as a
result of furring
Solution
→ Turn water flow control
knob (2) clockwise.
→ Clean and descale the
shower head.
→ Switch on or screw in the
fuse.
→ Restore the shower hose
to its original condition.
→ Clean and descale the
shower head.
Solution
→ Clean the filter after isola
ting the cold water supply
pipe.
→ Descale the appliance.
Reset the bimetal switch
manually.
Werbung
Inhaltsverzeichnis
