JVC SP-F303F Bedienungsanleitung Seite 4

Assembly (continued)
4
Connect the speaker cord to the speaker
terminal.
• Each speaker can be used as front or surround speaker.
Use the 5-meter speaker cords for front speakers and
10-meter speaker cords for surround speakers.
Twist and pull the
insulation coat to
remove.
Press and hold the Insert the exposed
clamp. core of the speaker
cord fully into the
terminal.
Release your finger.
Black
White
Black
White
5
Route the speaker cord as shown below.
• Be sure to take out the slack so that the speaker cord lies
flat.
Repeat the procedure from step 1 to assemble the other
satellite speakers.
– 3 –