Küppersbusch IKE236-0 Benutzerinformation Seite 26

26
5. Remove the correct part from the hinge
cover (E). Make sure to remove the part
DX, in the case of right hinge, SX in op-
posite case.
6. Attach the covers (C, D) to the lugs and
the hinge holes.
Attach the hinge covers (E) to the hinge.
C
D
E
7. Disconnect the parts (Ha), (Hb), (Hc) and
(Hd).
8. Install the part (Ha) on the inner side of
9. Push the part (Hc) on the part (Ha).
E
10. Open the appliance door and the kitchen
Ha
Hc
the kitchen furniture.
ca. 50 mm
ca. 50 mm
Ha
Hc
furniture door at an angle of 90°.
Insert the small square (Hb) into guide
(Ha).
Hb
Hd
90°
21 mm
90°
21 mm