Technical Data - MPVTruma MicroDrop Pro Bedienungsanleitung

Technical Data

Model:
Electricity supply:
Nebulization rate:
Particle size:
Nebulizer air flow:
Compressor air flow:
Compressor max. pressure:
Nebulizer capacity:
Weight:
Size:
Noise level:
Fuse:
Class II Device (Double Safety Insulation)
Type B Device (device with specific protection against electrical hazards)
Device for continuous use.
Device not protected against sprinkles.
Device not suitable for use in presence of anaesthetic substances inflammable with air, oxygen
or nitrogen protoxide.
Device not suitable for use in anaesthesia or pulmonary ventilation systems.
Reference to standards:
Manufacturer:
Ambient Conditions
Storing Conditions
Temperature:
Humidity:
Operating Conditions
Temperature:
Humidity:
Altitude:
26
MicroDrop Pro
®
230 Volt, 50 HZ, 1A
0.55 ml / min.
MMAD 1.8 µm (NaCl 0.9%) – API AEROSIZER
MMAD 4.17 µm INSITEC – MALVERN
3.3 l / min.
7.5 l / min.
2.50 bar
max. 15 ml
1.91 kg
(H) 106 x (L) 198 x (P) 233 mm
max. 52 dBA
T2.5 A, 250 V internal
Electric Safety Standard CEI EN 60601-1
Electromagnetic Compatibility according to CEI EN 60601-1-2
Class IIa Medical Device according to 93 / 42 / EEC MDD
Medel S.p.A., Via Micheli 7,
43056 S. Polo di Torrile (PR) Italy
Technical modifications reserved!
min. -25°C to max. 70°C
min. 10% RH to max. 95% RH
min. 10°C to max. 40°C
min. 10% RH to max. 95% RH
from 0 to 2000 m above sea level