Safety Instructions; Specifications - Monacor FO-642LED Bedienungsanleitung

Safety instructions:

This lighting unit is in line with the EU guidelines for electromagnetic compatibility and low
voltage.
The voltage at which this unit is powered (230 V ~) is dangerous! Do not open the unit,
because careless handling may cause an electric shock. Furthermore, any guarantee
expires when the power supply is opened.
Before operating also observe the following:
- Quickly power down the armature if:
1. The housing is visibly damaged,
2. There might occur a defect, for example, after the armature has dropped,
3. The unit is malfunctioning.
The unit must only be repaired by a qualified electrician.
- Remove dust with a soft, dry cloth. Never use chemicals or water.
- In the event of unauthorized or improper use or repair by an unqualified person the
warranty does not cover any damage.
- When the unit is taken out of operation definitively, take it to a local processing
recycling company.

Specifications:

1. Power: 220-240V~ 50Hz.
2. Sensor technology: PIR.
3. Rated load: 15W (56x 0.1Watt LED).
4. Lamp brightness: 500 lm.
5. LED colour: 4745 - 5310K.
6. Detection range: 8m diameter at 2.4m height , 20°C.
7. Detection angle 90°.
8. Time adjustment: 3 sec till 30min.
9. Lux control: Adjustable "Light level" sensing from 5 Lux to 1000 Lux.
10. Protection class IP44
Figure A
FO-642LED
PIR Motion Sensor LED Light
- 9 -