Troubleshooting - Monacor FO-642LED Bedienungsanleitung

Trouble Shooting:
1. Unit does not function at all/lights won't come on
- Check wiring to make sure that you have correct AC power at the unit.
- Check the wiring between the unit and the power source to make sure you have
wired the unit correctly.
- Check the ambient light control to see if it was set at your desired level.
2. Lights go on and off quickly
- Ensure light and heat are not being reflected onto the detector. Check for white or
reflective surfaces that may be causing the problem.
- Note the detector is more sensitive in cold weather.
- Make sure the sensor is not installed close to air-conditioner.
- Make sure the Lux setting is not at Test Mode position.
3. Lights stay on
- Adjust time to minimum, and ensure unit is firmly fixed to a solid object with no
moving objects in the field of view.
- Ensure detector is not being activated by stray moving heat sources such as
heating outlets, car etc.
4. Unit switches on in windy and rainy conditions.
- Adverse weather conditions and temperature changes can result in unwanted
activations.
- This can be minimized by mounting in a protected location.
6. Maintenance and repair
- Do not attempt to repair as this could invalidate warranty or result in personal
injury.
- Clean detector lens and outside casing with damp cloth.
- 15 -