Troubleshooting Guide - Whirlpool B TNF 5323 W Gebrauchsanleitung

TROUBLESHOOTING
GUIDE
Problem
THE APPLIANCE IS NOT
WORKING
THERE IS WATER IN THE
DEFROST PAN
THE EDGES OF THE APPLIANCE
CABINET, WHICH COME IN
CONTACT WITH THE DOOR
SEAL, ARE WARM TO THE
TOUCH
THE LIGHT DOES NOT WORK
THE MOTOR SEEMS TO RUN
TOO MUCH
414
Possible Cause
There may be an appliance
power supply problem .
This is normal in hot, damp
weather . The pan can even be
half full .
This is not a defect .
This is normal in hot weather and
when the compressor is running .
The light may need replacing .
The appliance may be in On/
Stand-by model .
Motor running time depends on
different things: number of door
openings, amount of food stored,
temperature of the room, setting
of the temperature controls .
Solution
› Check if power cable plugged
into a live socket with the proper
voltage .
› Check if the protection devices
and fuses of the electrical system
in your home .
› Make sure the appliance is
level so that the water does not
overflow .
› Make sure if the protection
devices and fuses of the electrical
system in your home work well .
› Check if the power cable is
plugged into a live socket with
the proper voltage
› In case the LEDs are broken
the user must call the Service
for exchange of the same type
available only at our After-sales
Service Centers or authorized
dealers .
› Make sure that the appliance
controls are correctly set .
› Check if there is not a large
amount of food been added to
the appliance .
› Check that the door is not
opened too often .
› Check that the door close
properly .