Renlig FWM7D5 Handbuch Seite 24

ENGLISH
1
Open the pump door.
Put a container below the recess of the
drain pump to collect the water that flows
out.
2
Press the two levers and pull forward the
drainage duct to let the water flow out.
3
When the container is full of water, put
the drainage duct back again and empty
the container. Do steps 3 and 4 again
and again until no more water flows out
from the drain pump.
4
1
Pull back the drainage duct.
Unscrew the filter and remove it.
5
Remove fluff and objects from the pump.
6
Make sure that the impeller of the pump
can turn. If this
does not occur, contact the service centre.
7
2
24
2
1