Before First Use; Daily Use - Renlig FWM6 Handbuch

ENGLISH
Spin button
Temperature button

Before first use

1. Ensure that the electrical and water
connections comply with the installation
instructions.

Daily Use

Open the door
Open the door by carefully pulling the door
handle outwards.
Load the laundry
By pressing this button, you can select only one of the options.
The relevant indicator illuminates.
• - Automatic speed reduction
The spin speed is half reduced, but not less than 400 rpm (re-
fer to "Programmes" chapter for each programme maximum
spin speed).
• - Rinse Hold
The water of the last rinse is not emptied out to prevent the
fabrics from creasing. Before opening the door it will be nec-
essary to empty out the water. Even if the washing pro-
gramme is completed the drum turns regularly to prevent the
laundry creases. To empty out the water, please read the
paragraph «At the end of the programme».
This button allows you to increase or decrease the washing tem-
perature. At the position
ing cycle with cold water.
Place the laundry in
the drum, one item at
a time, shaking them
out as much as
possible.
By pushing the door
frame, close firmly the
door.
, the appliance will perform a wash-
2. Remove any material from the drum.
Measure out detergent and fabric
softenert
First check the flap position:
UP - Flap position if
using POWDER
detergent
If the flap is not in the desired position:
10
DOWN - Flap
position if using
LIQUID detergent
during main wash