Care And Cleaning - Renlig FWM6 Handbuch

ENGLISH
surface and dab the stain with the fingertips
and a cotton cloth.
Rust: oxalic acid dissolved in hot water or a
rust removing product used cold. Be careful
with rust stains which are not recent since
the cellulose structure will already have
been damaged and the fabric tends to
hole.
Mould stains: treat with bleach, rinse well
(white cottons and fast coloureds only).
Grass: soap lightly and treat with bleach
(white cottons and fast coloureds only).
Ball point pen and glue: moisten with
1)
acetone , lay the garment on a soft cloth
and dab the stain.
Lipstick: moisten with acetone as above,
then treat stains with methylated spirits.
Treat any residual marks with bleach.
Red wine: soak in water and detergent,
rinse and treat with acetic or citric acid,
then rinse. Treat any residual marks with
bleach.
Ink: depending on the type of ink, moisten
the fabric first with acetone
acetic acid; treat any residual marks on
white fabrics with bleach and then rinse
thoroughly.
Tar stains: first treat with stain remover,
methylated spirits or benzine, then rub with
detergent paste.

Care and cleaning

Warning! Refer to Safety
chapters.
1) do not use acetone on artificial silk
1)
, then with
Degrees of water hardness
Water hardness is classified in so-called
"degrees" of hardness. Information on
hardness of the water in your area can be
obtained from the relevant water supply
company, or from your local authority.
Degrees of water hard-
ness
Characteris-
tic
German
°dH
Soft
Medium
Hard
Very hard
A water softener must be added
when water has a medium-high
degree of hardness. Follow the
manufacturer's instructions. The
quantity of detergent can then
always be adjusted (reduced) to
degree of hardness soft.
Warning! Switch the appliance
off before you carry out any
cleaning or maintenance work.
French °T.H.
0-7 0-15
8-14 16-25
15-21 26-37
> 21 > 37
21