Before First Use - Renlig FWM8 Handbuch

ENGLISH
Door lock indicator
Start/Pause button
Extra Rinse button
Super Quick button
Rinse Hold button
Spin reduction button
Temperature button

Before first use

1. Ensure that the electrical and water
connections comply with the installation
instructions.
This indicator illuminates when the programme starts and indi-
cates if the door can be opened:
• indicator on: the door cannot be opened. The appliance is
working or has stopped with water left in the tub.
• indicator off: the door can be opened. The programme is fin-
ished or the water has been emptied out.
• indicator blinking: the door is opening in a few minutes.
This button allows you to start or to interrupt the selected wash-
ing programme.
This appliance is designed for saving energy. If it necessary to
rinse the laundry using an extra quantity of water (extra rinse),
select this option. Some additional rinses will be performed. This
option is recommended for people who are allergic to deter-
gents, and in areas where the water is very soft.
By pressing this button, the appliance performs a short cycle for
lightly soiled items or for laundry which needs only freshening
up. We recommend you to reduce the fabric loading. The rele-
vant indicator illuminates.
Set this option to prevent the laundry creases. The drum turns
regularly to prevent the laundry creases.
There is a water in the drum when the programme is
completed. The door stays locked. You must drain the
water to unlock the door. To drain the water refer to
«At the end of the programme».
By pressing this button you can change the spin speed of the se-
lected programme.
The relevant indicator illuminates.
By selecting a programme, the appliance proposes automatical-
ly a default temperature. This button allows you to increase or
decrease the washing temperature. If you select
appliance will perform a washing with cold water.
The relevant indicator illuminates.
2. Remove any material from the drum.
10
position, the