Door Reversibility - IGNIS TT16AP Gebrauchsanweisung

60202054.book Page 23 Monday, October 24, 2011 10:34 AM

DOOR REVERSIBILITY

A. Remove the two screws (1/2) on the rear of the top (3) with
the aid of a Phillips screwdriver
B. Remove the plastic top (3) and the hinge hole cover cap (11)
C. Remove the two screws (4) holding the top hinge (5)
D. Move the cover (6) to the opposite side
E. Tilt the appliance and remove the two screws (7) holding
the bottom hinge (8) and the corresponding foot (9)
F. Remove the foot (10) of the opposite hinge side and invert
the position with the foot (9) of point (E)
G. Fit the bottom hinge (8) and the top hinge (5) on the
opposite side, repeating the steps from point A to point D in
reverse order
Figure 1
1./2. top screws
3. top
4. top hinge screws
5. top hinge
6. cover
7. bottom hinge screws
8. bottom hinge
9. hinge side foot
10. foot
11. hinge hole cover cap
23