Changing­the­password - Grundig G-BCAM-01 Bedienungsanleitung

SETTINGS
Changing­the­password
1
While "live streaming" is shown
on the screen, select the »Set-
tings« menu with »
2 Select the »Camera Settings« line
with » « or »
V Λ
with »OK«.
– Connected camera is viewed.
3
Go to the camera settings with
»OK«.
4
Select the »Change Password«
line with » « or »
V
with »OK«.
5
Press »OK« and enter and save
the current password using the
keyboard.
6
Select the »New Password« line
with » « or »
V Λ
with »OK«.
7
Enter a new password (max. 22
characters) and confirm it.
8
Enter the »Retype Password« line
with » « or »
V Λ
with »OK«.
9 Enter the new password again
and confirm it.
10
Select the push button
»Change« with »
adjust it with »OK«.
­_________________________________________
« (red).
▯
« and confirm
« and confirm
Λ
« and confirm
« and confirm
« or » « and
V Λ
Note:
If the new password will not be
7
saved, select the push button
»Cancel« with »
confirm with »OK«.
Selecting­the­image­trans-
mission­type
1 While "live streaming" is shown
on the screen, select the »Set-
tings« menu with »
2
Select the »Video Type« line with
» « or » «.
V Λ
3
Select the desired »mjpeg« or
»rtsp« image transmission type
with the » < « or »
– »mjpeg« – Video codec with
compressed image (recom-
mended for the WLAN con-
nected works);
– »rtsp« – Real time transmission
and minimum compression
video codec (recommended for
the LAN connected works).
Note:
If you face problems with »rtsp«
7
on wireless connection, change
your setting to »mjpeg«.
« or » « and
V Λ
« (red).
▯
> «.
ENGLISH
­ 3 1