Assembly­and­connection - Grundig G-BCAM-01 Bedienungsanleitung

ASSEMBLY­AND­CONNECTION
You can position your GRUNDIG
camera in a suitable place or mount
it onto the wall. Packaging of the
device contains an mounting brack-
et and fixing elements.
Wall­mounting
Notes:
Base unit should be fixed and it
7
should draw the static load.
For the wall superstructures,
7
for example for the wooden or
hollow walls, use appropriate
plugs and screws. For sug-
gestions, please consult your
authorised dealer.
Installation place should be
7
near a power outlet.
If the camera is not to be fixed,
7
the bracket (B) and fixings are
not required. Please start from
step 6.
­ 2 2 ENGLISH
1
Remove the safety screw in the
mounting bracket (A) and loosen
the connection fittings (B).
2
Insert the fixing (B) to the camera
base and tighten it with the sup-
plied screws (C).
(C)
3 Determine the installation place of
the camera and mark the places
where holes will be drilled on the
wall by using the mounting kit.
­___________
(A)
(B)
(C)