Grundig G-BCAM-01 Bedienungsanleitung Seite 25

NETWORK­INSTALLATION
5
Select the »Search Camera« line
with » « or »
V
with »OK«.
– After a while, the found camera
icon and IP address will be
displayed.
Note:
If camera search fails;
7
For detailed search, press
(red);
or
if the detailed search fails too,
for Manual IP entry, press »
(green).
6
Confirm the found camera with
»OK«.
– »Add Camera« menu will be
displayed.
7
In order to display the on-screen
keyboard, press »OK«.
Notes­for­data­entry:
Data are entered with the pop-up
7
keyboard. Select the necessary
letters/numbers with »
» « or » « and confirm with
< >
»OK«.
To toggle between uppercase and
7
lowercase letters, select »Shift«
and confirm with »OK«.
Keyboard mode can be changed by
7
pressing » « (red).
▯
You can change the language of
7
the keyboard/key assignments
with » « (green).
▯▯
« and confirm it
Λ
» «


«, »
V Λ
­ _ _________________
Last character/number can be de-
7
leted with »
All entries can be deleted with
» « (yellow).
▯▯▯
If the entry of the current line is
7
completed, close the keyboard
» «
with <
8
Enter and save the name of the
camera according to your pref-
erence as explained in the notes
about data entry.
9
Select the »Password« line with
«
» « and open the pop-up key-
V
board with »OK«.
Notes:
Camera password has been set
7
as »admin« as standard factory
default.
We recommend you to use a
7
password belonging to you, see
page 31 "Settings" section.
10
Enter and save »admin« pass-
word as explained in the notes
about data entry.
«,
11
Select the push button »OK«
with »
V
»OK«.
– "Live streaming" of the camera
is shown on the screen.
Note:
If the modem is switched off and
7
on, IP address of the camera
may change, then repeat the
steps from
« (blue).
▯▯▯▯
.
« and confirm with
5 to 11.
ENGLISH
­ 2 5