SETTINGS
Notificationmodeoptions
Deactivation/Activationofthe
MotionDetectionFunction
1
While "live streaming" is shown
on the screen, select the »Set-
tings« menu with »
2
Select the »Detection Settings«
line with
« or »
V
with »OK«.
– Menu is displayed.
3
If the notification should be made
only by sound, select the »x«
character in the box next to the
»Enable Motion Detection« with
« or »
« and delete it with
V
Λ
»OK«.
– Motion detection is disabled.
Note:
In order to restart the video
7
monitoring, select the box with
»
« or »
« and adjust the »x«
V
Λ
character with »OK«.
Motiondetectionsettings
1
Select »Ambient Light« with »
or »
« and select either »Light-
Λ
ness« or »Darkness« with »
»
« depending on the condition
>
of the environment.
2
Select the »Movement Sensitivity
(%)« line with the »
button and adjust the sensitivity
with »
<
« or »
>
_________________________________________
« (red).
▯
« and confirm
Λ
V
« or
<
« or »
«
V
Λ
« .
3
Select the »Movement Rate (%)«
line with the »
and adjust the movement rate
with »
« or »
<
Note:
Movement rate is the proportion
7
of the size of the moving object
to the movement area. When
this value is selected higher,
detection will be enabled upon
movement of large objects.
When this value is selected
lower, detection will be enabled
upon movement of small objects
4
To adjust the area of detection,
select »Movement Window« line
with »
« or »
V
confirm with »OK« button.
By using »
button, select the position of the
detection window.
With »
« (red), »
▯
»
« (yellow) and »
▯▯▯
(blue) buttons adjust the dimen-
sions of the detection window.
To end the setting process, press
»
« button.
<
«
« or »
« button
V
Λ
«.
>
« button and
Λ
«, »
«, »
<
« or »
V
Λ
« (green),
▯▯
«
▯▯▯▯
ENGLISH
>
«
2 9