Grundig G-BCAM-01 Bedienungsanleitung Seite 21

OVERVIEW
Camera lens and its cover.
A
Brightness sensor determines the
B
brightness of the location of the
camera.
Infrared
LEDs turn on if the
C
brightness at this location is not
sufficient (Night Vision mode).
Adjustment Ring is used to cor-
D
rect the image clarity.
Microphone.
E
LAN Indicator
F
on: it means that the LAN con-
nection is activated;
flashes: it means that data
transfer is in progress;
off: it means that the LAN con-
nection is deactivated.
Operation LED, turns on when
G
the camera is in operating.
WLAN antenna input socket.
H
Ethernet, it is a socket to con-
I
nect to the home network with a
LAN cable.
­_______________________________________
DO­... DIR, no function.
J
WPS/Reset, is the button to
K
record the camera to the router;
(If Router WPS supports, you
can make wireless connection
by pressing and holding the
button on the camera for 3 to 10
seconds while pressing the WPS
buttons on the router concur-
rently).
in order to reset the camera to its
factory defaults, press and hold
the button for more than 10 sec-
onds; all settings will be deleted.
SD, no function.
L
DC­12V, is a connection socket
M
for the power supply delivered
with the device.
Audio­Out, no function.
N
ENGLISH
­ 2 1