Grundig G-BCAM-01 Bedienungsanleitung Seite 26

NETWORK­INSTALLATION
Registration­of­the­Cam-
era­via­the­Wireless­Net-
work­"WLAN"­
Notes:
In order to make the wireless
7
network "WLAN" settings, first
camera should be connected to
the router over the cabled local
area network.
Many home networks are Dy-
7
namic Networks. If you have
a dynamic network, you must
use a DSL modem that supports
DHCP. If the DHCP server of the
modem does not work, the cam-
era cannot receive an IP.
1
Switch on your television.
2
Select the »Quick Apps« menu
with »@«.
3
Select the »BabyWatch« applica-
« or »
tion with »
V
with »OK«.
– "Live streaming" of the camera
is shown on the screen.
4
While "live streaming" is shown on
the screen, select the »Settings«
menu with the »
5
Select the »Camera Settings« line
with the » « or »
V
with »OK«.
– The camera which is connect-
ed to the network via cabled
"LAN" is displayed on the
screen.
­ 2 6 ENGLISH
« and confirm
Λ
« (red).
▯
« and confirm
Λ
­ _ _________________
6
Enter the camera settings with
»OK« and select the »Set Wire-
less Connection« line with the »
or » « and confirm with »OK«.
Λ
– After a while, available wireless
networks will be displayed on
the screen.
7 Select the wireless network which
the TV is connected to by using
» «, » « » « and »
<
V Λ
firm with »OK« button.
– Network name and entrance
menu with password will be dis-
played.
8
Select the »Password« line with
the »
« or »
V Λ
Enter by using the keyboard the
wireless network password and
close the keyboard with »
9 Select »Yes« push button with »
and confirm with »OK«.
To return to the »Settings« menu,
10
press » «.
<
Remove the Network cable.
11
LAN led on the camera will flash
quickly.
– Wireless network connection is
made now.
12­­ I n order to view the "live stream-
ing" of the camera on the screen,
press » « (red).
▯
V
« and con-
>
« and press »OK«.
«.
<
V
«
«