Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ASSEMBLYANDCONNECTION
4
Drill the holes on the wall and
insert the given plugs into these
holes.
5
Fix the mounting bracket with the
4 supplied screws to the wall.
6
For the WLAN operation, screw
the WLAN antenna onto the de-
vice;
or
for LAN operation, connect the
LAN cable to the »Ethernet«
socket.
Note:
LAN cable is supplied with the
7
device.
7
Plug the power cable to the
»DC12V« socket.
8
Adjust the camera position onto
the mounting bracket and tighten
the safety screw (A).
(A)
9
Plug the DC 12V adaptor to the
wall socket.
– Operation LED lights up soon
and the camera tests the motors
automatically.
10
Connect the LAN cable to an
unused socket on the modem or
router.
Warning:
Do not connect the camera to
7
the LAN input of the television
set. Camera and television
should be connected to each
other over modem or router as
to be on the same network.
Notes:
Remove the lens cover.
7
Adjust the camera to the obser-
7
vation position by using the but-
tons on the remote control.
See Adjusting Sharpness sec-
7
tion on page 27 to adjust image
sharpness.
___________
ENGLISH
2 3
Werbung
Inhaltsverzeichnis
