Scope Of Delivery; Proper Use - Improper Use - Hensel Rc/Rf Bedienungsanleitung

HENSEL Studiotechnik Radio Flash Trigger and Power Control System RC/RF
Set (Code 387)
1 Introduction
Gratulation,
purchasing the HENSEL Radio Flash Trigger and Power
Control System RC/RF you have got state-of-the-art
technology of radio remote control. The low energy
consumption of the Radio Transmitter provides a long-lasting
life of the unit with one and the same battery pack. The radio
technology allows you to operate independent of environmental
factors like ambient light that interfere with the receiver. You
can even trigger flashes if your flash units are out of sight – a
fact that favores the radio technology over the IR technology. In
addition, HENSEL flash units with built-in Radio Receiver will
enable you to adjust the flash power of the HENSEL flash units
and to switch between different modeling light options. And
what more do you want?
So that you are able to successfully and productively work with
this system for many years, we are giving you some advice on
the use of this high tech product.
If you should have any questions on the use, then feel free to
ask us at any time.
HENSEL Studiotechnik
2

Scope of delivery

The Radio Transmitter (Code No. 390) as well as the Set of
Radio Transmitter and Receiver (Code No. 387) come with a
synchronization cable with 2.5 mm synchronization plug.
3 Proper use – improper use
The HENSEL Radio Receiver RC/RF-TS is used for triggering
flashes, adjusting the flash power and switching the modeling
lamp between FULL/OFF/PROP in HENSEL flash units with
built-in receiver (PORTY Premium power pack and PLUS
versions of the EXPERT PRO / INTEGRA PRO series) via
radio signal.
User Manual - Page 9 -