Nikon AF-S NIKKOR 400mm f/2.8G ED VR Benutzerhandbuch Seite 23

b
The Nano Crystal Coat deposited on some of the lens elements
ensures that fine, clear images can be reproduced under any
shooting conditions, from the sunny outdoors to spotlighted interior
scenes.
b
Meniscus glass, unlike existing flat glass, is used for the lens
protective glass.
Important!
• Be careful not to hold the camera body when the lens is attached, as
this may cause damage to the camera. Be sure to hold both the lens
and camera when carrying.
• Be sure to attach a 52mm screw-in filter to the slip-in filter holder.
• Be careful not to soil or damage the CPU contacts.
• AF-I/AF-S Teleconverters TC-14E/TC-14EII/TC-17EII/TC-20E/
TC-20EII/TC-20EIII are usable.
• When mounted on Nikon DX format digital SLR cameras, such as the
D300-Series and D7000, the lens' picture angle becomes 4° and its
35 mm equivalent focal length is approx. 600 mm. (The lens' picture
angle is 6°10' at 35 mm focal length.)
• If the lens mount rubber gasket is damaged, be sure to visit the
nearest Nikon authorized dealer or service center for repair.
En
23