Daily Use - IKEA NUTID HIN3T Anweisungen

ENGLISH

Daily use

Switching the hob ON/OFF
To switch the hob on, press the
for approx. 2 seconds until the cooking zone
displays light up. To switch off, press the
same button until the displays switch off. All
the cooking zones are switched off.
If the hob has been in use, the residual heat
indicator "H" remains lit until the cooking
zones have cooled down.
The hob automatically switches off if no
function is selected within 10 seconds of
switching on.
Before use
Important: The induction cooking zones will
not switch on if pots and pans are not of the
correct dimensions.
Only use pots bearing the symbol
"INDUCTION SYSTEM".
Before switching the hob on, position the
pot on the desired cooking zone.
Existing pots and pans:
Use a magnet to check whether pots or
pans are suitable for use on the induction
hob: pots are unsuitable if they cannot be
magnetically detected.
1. Ensure pots have a smooth bottom,
otherwise they may scratch the hob's
glass ceramic surface. Check dishes.
2. Do not use empty pots on the hob. This
could result in damage to both the glass
ceramic surface and the bottom of the
pots.
3. Never place hot pots or pans on the
hob's control panel. This could result in
damage.
Switching on and adjusting cooking zones
button
Button –
Cooking zone
positioning
After switching on the hob and positioning
the pot on the chosen cooking zone, adjust
the heat setting using the button +. When
switched on, the display shows level 5.
Each cooking zone has different heat
settings that can be adjusted using the
buttons +/-, which go from "1":
min. heat setting to "9": max. heat setting.
Some cooking zones have a fast boil
function (Booster), shown on the display with
the letter "P".
Fast boil function (Booster)
This function, only present on some cooking
zones, makes it possible to exploit the hob's
maximum power (for example to bring
water to the boil very quickly).
To select this function, press the button "+"
until "P" appears on the display or, after
switching the hob on, press the "-" button
for the selected cooking zone. In this case
too, "P" appears on the display. After 10
minutes' use of the booster function, the
appliance automatically sets the zone to
level 9.
Switching off cooking zones
Select the cooking zone to be switched
off, pressing the "+" or "-" button (a dot
at the bottom right of the power level is
displayed).
Press the key "-" to set the level to "0".
Heat setting
indicator
Button +
Selected cooking
zone indicator
6