Connecting The Max! Cube - eQ-3 MAX! Cube Bedienungsanleitung

6.1 Connecting the MAX! Cube

1. Connect the MAX! Cube to the power supply:
The MAX! Cube draws its power supply from the plug-in
main adapter included in the scope of supply.
Attention: To avoid damaging the device, please
only use the original main adapter supplied with the
device for the power supply.
• Plug the USB main adapter supplied into a socket outlet.
• Connect the MAX! Cube and the main adapter with the
USB cable. Use the USB port on the side of the device
(2) for this purpose (see diagram on page 19).
• The Power LED starts to flash as soon as the MAX! Cube
initiates a self-test.
• The Power LED lights up continuously once the self-
test has been successfully completed and the power
supply is present.
2. Connect the MAX! Cube to the router/PC:
• Connect the MAX! Cube to a router. To do this, plug the
network cable supplied with the device into the designa-
ted port (1) on the side of the MAX! Cube (see diagram
on page 19). Connect the other end of the cable to a free
ethernet slot on your router.
• Connect the router to your PC.
22
• The Internet LED starts to flash as soon as the connec-
tion to the router is active.
Alternatively, the MAX! Cube can be supplied with
power via a USB port on a router or a computer. Ple-
ase note that in the case of some models, the USB
voltage is no longer available once the device has
been switched off.
If the power supply to the MAX! Cube is interrupted,
the thermostats in the rooms continue to regulate
the temperature independently. The MAX! Cube ser-
ves as the interface to the MAX! software, to a MAX!
Eco Button and as a central data store.
23