Overview - eQ-3 MAX! Cube Bedienungsanleitung

Additionally, the status of all rooms can be checked via the
MAX! Cube at all times. The MAX! Cube links the MAX!
devices in your house and your computer network. Fur-
thermore, the device stores any settings and configura-
tions that you have made.
Different settings and configurations for all MAX! devices
can be made for individual rooms. As the MAX! Cube sa-
ves all settings and configurations, the system can be ope-
rated even without PC or active Internet connection. The
wireless communication between MAX! components is
performed in two directions (bidirectional). This ensures
that the information sent reaches the recipient and possi-
ble interferences are detected.
If you have been using the MAX! Room Solution or the
MAX! Radiator Solution so far, all MAX! devices can easi-
ly be integrated into to MAX! House Solution. Therefore,
you only have to restore the factory settings of your MAX!
components and teach-in the devices to the MAX! Cube.
You will find further information in the operating manual of
the single devices.
18

2. Overview

Top
Power: The LED indicates whether a
power supply is present and if the de-
vice is ready for operation.
Internet: The LED indicates whether
a connection to the network/MAX!
Portal exists.
Battery: The LED indicates whether
the battery needs to be replaced on
a MAX! Component.
Underside:
Reset button: Restores the factory
setting.
Side:
(1) Network port to connect to a
router
(2) Port for for USB power supply
(see Section 6.1)
1 See chapter 8 for LED flashing sequences
:
1
19