Safety Instructions; Instructions For Disposal; Mounting; Setting Up The Max! System - eQ-3 MAX! Cube Bedienungsanleitung

3. Safety instructions

This device is not a toy; do not allow children to play
with it. Do not leave packaging material lying around,
as it can be dangerous in the hands of a child. Do
not open the device: it does not contain any compo-
nents that need to be serviced by the user. In the
event of an error, please return the device to our
service department.
The device may only be operated indoors and must
be protected from the effects of damp and dust, as
well as solar or heat radiation. Using this device for
any purpose other than that described in this ope-
rating manual does not fall within the scope of inten-
ded use and shall invalidate any warranty or liability.
This also applies to any conversion or modification
work. This device is intended for private use only.

4. Instructions for disposal

Do not dispose of the device with regular domestic waste!
Electronic equipment must be disposed of at
local collection points for waste electronic equip-
ment in compliance with the Waste Electrical and
Electronic Equipment Directive.
The CE Marking is simply an official symbol
relating to the free movement of a product; it does
not warrant a product's characteristics.
20

5. Mounting

The MAX! Cube can be fastened to the wall or stood up
on its feet.
Use the wall bracket if you wish to mount the MAX! Cube
on a wall:
• Use a pen to mark the bore hole
positions (a) of the wall mount
on the wall.
• Use a drill to make the holes as
illustrated (a).
• Use the screws and plugs sup-
plied to fasten the bracket to the
wall.
• Once the wall bracket is in place,
the MAX! Cube can be attached
to the wall bracket from above,
with the opening pointing down.

6. Setting up the MAX! system

System set-up involves the following steps, which are de-
scribed below:
• Connecting the MAX! Cube
• Installing the MAX! software
• Installing and teaching in the MAX! devices
• Setting up Internet control
21