Changing The Bluetooth Setting - JVC KD-R901 Bedienungsanleitung

Changing the Bluetooth setting

You can change the settings listed on the following
according to your preference.
Preparation:
• Connect the supplied USB Bluetooth Adapter
(KS-UBT1) to one of the USB input terminals of the
unit.
1
[Turn]
<Bluetooth>
2
Select a setting item.
[Turn]
Ô
<Quick Call> <Auto Connect>
Ô
<Auto Answer>
Ô
<MIC Setting>
Ô
<Phonebook Trans>
<Phonebook Select>
Ô
<Information>
* If the connected Bluetooth phone does not support
SMS notification (via Bluetooth), the unit will not
receive any notification upon the arrival of a SMS
even when <Message Notice> is set to <On>.
3
Change the setting accordingly.
[Turn]
=
[Press]
<Settings>
=
[Press]
Ô
<Message Notice>*
Ô
<Ringing Tone>
Ô
Ô Ô
<Initialize>
(back to the beginning)
=
[Press]
<Settings> menu ( : Initial)
Quick Call
You can preset the Quick Call method. Hold
the selected method.
• Appears only when a Bluetooth phone is connected.
Dialed Calls: Show the list of the numbers you have
dialed.
Received Calls: Show the list of the numbers you have
received.
Missed Calls: Show the list of the numbers you have
missed.
Phonebook: Show the list of the phonebook.
Dial Number: Display the "Dial Number" screen.
Voice Dial: Display the voice dialling screen.
Auto Connect
When the unit is turned on, the connection is
established automatically with...
Last: The last connected Bluetooth device.
Off: No Bluetooth device.
Auto Answer
Only for the device being connected for "BT FRONT
(Phone)/BT REAR (Phone)."
On: The unit answers the incoming calls
automatically.
Off: The unit does not answer the calls
automatically. Answer the calls manually.
Reject: The unit rejects all incoming calls.
Message Notice
Only for the device being connected for "BT FRONT/
BT REAR (Phone)."
On: The unit informs you of the arrival of
a message by ringing and displaying
"Received Message."
• The display illuminates in blue (see
<Ring Color> on page 28).
Off: The unit does not inform you of the arrival of
a message.
to enter
Continued on the next page
SETTINGS 33