Installation - Sharp SJ-25P Bedienungsanleitung

DESCRIPTION
1. Freezer shelf (Small)
2. Ice cube maker
3. Ice cube box
4. Freezer shelf (Large)
5. Freezer temp. control knob
6. Refrigerator temp. control knob
7. Light
Replacing the lamp bulb
Replace lamp bulb with same type.
Refrigerator: base E12, MAX 10W, T-20
Make sure that the rated voltage and wattage of the
lamp bulb are correct when replacing.
(Check the label near the bulb)
When replacing the lamp bulb, unplug the fridge
freezer first to prevent electric shock.
8. Refrigerator shelf (Small)
9. Refrigerator shelf (Large)

INSTALLATION

1.To ensure adequate ventilation for your fridge freezer, it is
recommended to provide space of 6cm on both sides and
at the back, and space of 9cm above the fridge freezer.
Insufficient spacing will decrease the cooling efficiency,
resulting in unnecessary consumption of electricity.
2.Using the front Adjustable foot, ensure that the fridge
freezer is positioned firmly and level on the floor.
NOTE:
• Keep your fridge freezer out of direct sunlight.
• Do not place next to heat generating appliance.
3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
16
18
19
20
21
10. Three position adjustable shelf
This shelf has three positions, it can be partly or
fully extended or be fully folded away simply by
pushing the shelf back then lifting it up.
11. Evaporating pan (rear side)
12. Shelf
13. Fruit and vegetable crisper
14. Adjustable foot
15. Table top
Do not place hot objects on Table top. The table may melt
and deform. The table can resist temperatures up to 100°C.
16. Freezer shelf
17. Light switch
18. Magnetic door seal
19. Egg holder
20. Free pocket
21. Bottle pocket
9cm
6cm
Adjustable
foot
6cm
6cm
96.5cm