Turning Power On/Off; Turning On The Main Power; Disabling Power On/Off Operations - Sharp PN-425 Bedienungsanleitung

Caution
• Turn on the monitor first before turning on the PC or
playback device.

Turning on the main power

Main power switch
When the main power switch is off, the monitor cannot be
turned on using the POWER button on the remote control unit.

Turning power on/off

Press the POWER button to turn the power ON/OFF.
Status of a power LED
Green lighting
Orange lighting
Green flashing
Caution
• When switching the main power switch or the POWER
button off and back on, always wait for at least 5 seconds.
A short interval may result in a malfunction.
TIPS
• If the monitor is in the input signal standby mode and you
press the POWER button on the remote control unit, the
monitor enters standby mode.
• You can turn on/off the monitor by pressing the power
switch of the monitor.
14
E
Turning Power On/Off
INPUT
Power LED
Status of the monitor
Power "On"
Power "Off" (Standby mode)
Input signal standby mode
(input using a PC)

Disabling power on/off operations

Power on/power off operations can be disabled in order to
protect the monitor from an accidental power off. Set
ADJUSTMENT LOCK in the FUNCTION 1 menu to "2". (See
Operation guide.)