Sharp ED05EW Bedienungsanleitung Seite 8

__________________________________________________________________________________
You may then need to adjust the position of the handlebars on the stem by loosening the screws of
the stem cover, turn the handlebars at your convenience and tighten these same screws. Take care
that the handlebars are correctly centered.
Tires
Check tire pressure regularly. Driving with under-inflated or over-inflated tires can affect performance,
cause premature wear, reduce range or increase the risk of an accident.
If significant wear or a nick is visible on one of the tires, replace it before riding the bike. A pressure
range is indicated on the sidewall of the tire by the manufacturer and in the following table. The
pressure must be adapted according to the weight of the user.
Pressure
Model Bike size Air chamber size Tire size PSI Bar
Check the value Check the value
City 28" 700 x 42 700 x 42 directly on the directly on the
tyre tyre
Method for determining correct adjustment of quick-release mechanisms (wheel and seat clamp)
Quick release devices are designed to be operated by hand. Never use tools to block or unblock the
mechanism so as not to damage it.
To adjust the clamping force of the wheel axle, you must use the adjusting nut and not the quick
release lever. If the lever can be moved with minimal hand pressure, it is not tight enough. It is
therefore necessary to tighten the adjusting nut.
The quick-release system must mark the fork dropouts when closed in the locked position.
At each adjustment operation, check that the front wheel is correctly centered in relation to the fork.
To adjust, close and open the quick-release mechanisms, apply the following method:
8