Scheppach RRMA500APP Originalbetriebsanleitung Seite 28

• Never connect the power supply unit to a socket if
the plug or cable is damaged.
• Worn or damaged cables increase the risk of an
electric shock.
• Only charge the batteries in the charging sta-
tion supplied. Incorrect use may result in electric
shocks, overheating or leakage of corrosive liq-
uid from the battery. Rinse with water/neutralising
agent in the event of electrolyte leakage. In the
event of contact with the eyes, please seek imme-
diate medical attention.
• Only use manufacturer's recommended original
battery. Product safety can only be guaranteed
when original batteries are used. Do not use bat-
teries that are not rechargeable.
• The product must be disconnected from the mains
when removing the battery.
Safety instructions - operation
• The product must only be used with the equipment
recommended by the manufacturer. Other types of
use are not permitted. The manufacturer's instruc-
tions regarding operation/maintenance must be
strictly adhered to.
• When using the product in public areas, warning
signs must be placed around the work area. These
signs must bear the following text:
"Warning! Robotic lawnmower! Keep your dis-
tance from the product! Children must be su-
pervised!"
• Switch the product off if there is anyone (in par-
ticular children) or any animals within the working
range. It is recommended to program the product
to operate during times when there is no activity in
the area, e.g. at night. Note that certain animals,
e.g. hedgehogs, are nocturnal. They could poten-
tially be injured by the product.
• Children are not allowed in the working area dur-
ing operation.
• Children are forbidden to play with the product,
both out of and in use.
• Always ensure that the product is switched off when
carrying it. Not with arms outstretched but always
against the body. Ensure you have a secure footing.
• Do not run while transporting the unit. Walk careful-
ly and always make sure you have a secure footing.
• Always wear sturdy footwear and long trousers
when using the product.
• Do not operate the device in bad weather condi-
tions, especially during thunderstorms. There is a
danger of lightning strike.
• Use a residual current circuit breaker with a trigger
current of 30 mA or less. Use of an RCD reduces
the risk of electric shock.
• ATTENTION: The extension cable as well as the
mains cable must be outside the working area to
ensure that it is not damaged.
28 | GB
• The product may only be operated, maintained and
repaired by persons who are fully familiar with its
characteristics and the safety regulations to be
observed during use. Read the operating manual
carefully and familiarise yourself with the contents
before using the product.
• It is not permitted to change the original design of
the product. All changes in this regard are made at
the user's own risk.
• Make sure that there are no foreign objects such
as stones, branches, tools or toys on the lawn. The
blades can be damaged if they collide with for-
eign objects. Always switch off the product with the
POWER ON/OFF button before removing a block-
age. Check the product for damage before operat-
ing it again.
• If the product starts to vibrate abnormally, always
switch it off with the main switch or POWER ON/
OFF button and check for damage before operat-
ing it again.
• Start the product in accordance with the instruc-
tions. When the product is switched on, make sure
that your hands and feet are not near the rotating
blades. Keep your hands and feet away from the
underside of the product.
• Never touch moving dangerous components, such
as the blade disc, before they have come to a com-
plete stop.
• Do not lift the product or carry it around when it is
switched on.
• Do not let anyone operate the product who does
not know how it works and behaves.
• The product must not collide with persons or oth-
er living creatures. If a person or other living crea-
ture enters the travel path of the product, it must be
stopped immediately.
• Do not place any objects on the housing or the
charging station of the product.
• Never allow people to sit on the robot. Never lift the
robot to inspect the cutting edge or carry it during
operation. Do not place hands or feet under the ro-
bot during operation.
• The product must not be operated with damaged
guards, blade plate or housing. Furthermore,
it must not be operated with damaged blades,
screws, nuts or cables. Do not connect or touch
damaged cables until they have been disconnect-
ed from the power supply.
• Do not use the product if the POWER ON/OFF but-
ton and the STOP button are not working properly.
• Always switch the product off via the ON/OFF but-
ton if it is not in use. The product will only start if
the POWER ON/OFF button is switched on and
the correct PIN code is entered.
• If the power cord is damaged during use, press the
"STOP" button to stop the robot and unplug the
mains cable from the socket.
www.scheppach.com