Shark Powerdetect UV Reveal RV3000XEEU Serie Bedienungsanleitung Seite 10

BASE MAINTENANCE OVERVIEW
CAUTION: Before performing any maintenance, unplug the base from the socket.
Component
Empty every 60 days,
Base Dust Bin
Clean every 30 days,
Base Pre-Motor Filters
Base Post-Motor
Clean every 6 months,
Filter (HEPA)
Clean every 3 months,
Base Ramp
Clean every 30 days,
Base Wash Tray
Clean every 30 days,
Greywater Grate
Anti-Odour Technology Replace the odour cartridge
NOTE: Anti-Odour Technology is not
included with all models.
Clean every 30 days,
Clean Water Tank
or before every refill.
Clean every 30 days,
Greywater Tank
MOP PAD SANITISATION INSTRUCTIONS
To achieve the sanitisation benefit on the robot's mopping pad:
1. Fill the clean water tank on the base with distilled water up to the water
2. After each wet cleaning mission, allow the base to completely wash and dry the mopping pad without interruption.
To purchase parts and accessories, visit sharkclean.eu.
s h a r kc l e a n . e u
Frequency Replacement Part(s)
XDRV29XLDCEUK
or as needed. XDC2900WDWEUK
XPRFRV2800EEU
or as needed.
XPMFRV2800EEU
or as needed.
XDRV2900RPBUK
or as needed. XDRV2900RPWUK
N/A
or as needed.
XMFRV2800WDEUK
or as needed.
XSK3000EUUKT
every 6 months,
314KKU2900EUK
or as needed.
XDRV29XLCWEUK
XDRV29XLDWEUK
or as needed.
maximum fill line.
ROBOT MAINTENANCE OVERVIEW
CAUTION: Before performing any maintenance, power off your robot by holding the Power/Dock
on the robot for 3 seconds, then remove the water tank.
Component
Brushroll
Filter
Dust Cup
Mop Pad
NOTE: After every wet cleaning
mission, the base will automatically
wash and dry the robot mop
pad. Additional cleaning in
a washing machine may be
needed occasionally.
Sensors and Charging Contacts
Side Brush
Sensor Name
Cliff sensors use infrared ranging to prevent your robot
Cliff Sensor
from falling off stairs and ledges. If the cliff sensors detect
stairs or ledges, the robot will stop moving forward.
The LiDAR sensor uses laser ranging to help the robot
LiDAR Sensor
create maps of your home. Detective distance is 8 m.
With one RGB camera, one line-laser and one IR camera,
RGB 3D Sensor the 3D sensor scans objects to identify an image through
algorithms. FOV: H = 94.7°, V=75.1°, D=115.6°.
The left wall follow sensor detects the distance between
Left Wall Follow Sensor objects and the left side of the robot through TOF ranging.
The detective distance is 30 mm.
The right wall follow sensor detects the distance between
Right Wall Follow Sensor
the objects and the right side of the robot through the line
laser. Detective distance is 100 mm.
To purchase parts and accessories, visit sharkclean.eu.
Frequency Replacement Part(s)
Clean every 30 days,
4947K2800WDEUK
or as needed.
Clean every 30 days,
XPRFRV2500EUK
or as needed.
Clean every 30 days, XDC2900WDBEUK
or as needed. XDC2910WDWEUK
Replace every 2 years, PADRV29WDAEUK
or as needed. PADRV290WDEUK
Clean every 30 days,
N/A
or as needed.
Replace as needed. 820KKU2800WDEU
Functional Description
s h a r kc l e a n . e u
button