Special Safety Precautions for Lasers:
Laser class
Power
Wavelength
• CAUTION: Never look directly into the beam. Avoid looking directly
into the beam with unprotected eyes. We recommend you wear laser
protection goggles at all times during use.
• Make sure the laser beam is not reflected by the workpiece or the
clamping tools.
• Do not look into the beam with optical instruments such as a
magnifying glass.
• Do not point the laser beam at persons or animals. Children must be
kept away from the tool.
• The laser should be used in accordance with this instructions
manual.
• Repairs of the laser device may be performed by a qualified specialist
only.
Intended use
The jigsaw is used for sawing wood, plastics, or metal by using the
appropriate saw blades. It is suited for straight and curved incisions
with a mitre angle of up to 45° .
Symbols used on the name plate
2
<1 mW
650 nm
Caution, general hazard
Read instructions manual before use
Wear protective goggles before use
Wear hearing protection before use
Laserlight
Do not look into the beam!
Laser class 2
acc. to EN 60825-1+A11
P ≤ 1mW; λ = 650 nm